Pipeline Pump
Product Description
ISG series single stage single suction piping centrifugal pumps are smartly designed on the basis of ordinary vertical pumps jointly by our scientific and technical personnel with pump experts at home.
They use domestic advanced hydraulic model and the performance parameters of IS centrifugal pumps.According to the difference in service temperature,medium and conditions etc.,
ISG series single stage single suction piping centrifugal pumps are smartly designed on the basis of ordinary vertical pumps jointly by our scientific and technical personnel with pump experts at home.They use domestic advanced hydraulic model and the performance parameters of IS centrifugal pumps.According to the difference in service temperature,medium and conditions etc., there have been hot water pumps,high temperature pumps,anticorrosion chemical pumps,oil pumps,explosion-proof chemical pumps and low speed pumps derived from ISG.
Featuring high efficiency,energy conservation,low noise and stable performance etc., this series of products conform to the latest standard of JB/T53058-90 issued by Ministry of Machinery,P.R.China,and are designed and manufactured to ISO2858 standard.
Features
1.Vertical structure,inlet and outlet are of the same sizes and on the same center line, can be mounted in pipeline, just like a valve does, compact and appealing appearance, small occupation floor, low construction cost, outdoor service if provided with a protection cover.
2.Impeller directly mounted on the extended shaft of motor, short axial dimensions, compact structure, and reasonable confighration of pump and motor bearing to effectivety balance the radial and axial load produced by pump operating, thus to ensure smooth operation, little vibration and low noise.
3.Using of mechanical seal or mechanical seal combination for shaft seal, imported titanium alloy sealing ring, intermediate high temperature resisting mechanical seal, hard alloy material and wear resistant seal, which effectively lengthen the service life of mechanical seal.
4.Easy installation and maintenance, no need to disassemble pipeline system, and all rotor components can be taken out only by taking off the nuts on the union seat of pump.
5.Modes of series and parallel running responding to the flow rate and delivery head required.
6.Vertically and horizontally installed according to the requirements of pipeline arrangement.
1.Suction pressure ≤ 1.0MPa, or the maximum working pressure of pump system ≤ 1.6MPa, pump static test pressure at 2.5MPa. Please specify the working pressure of the system when placing an order. To acquire working pressure of pump system greater than 1.6MPa should be specified separately when placing an order for our convenience to use cast steel for wetted parts and connection parts in production.
2.Ambient temperature <40°C,relative humidity <96%.
3.Volume content of solid particels in medium to be delivered shouldn’t exceed 0.1% of unit volume, granularity <0.2mm.
Note: to handle medium carrying small particles, please spceify when placing an order for our convenience to use wear resistant mechanical seal.
